kitchen trolley Upcycle

How to Upcycle an Ikea Bekvam Kitchen Trolley

I decided to update our plain IKEA Bekvam Kitchen Trolley after it spent a sad year living outdoors on a patio.  It was pretty worse for wear and covered with lots of dirt and stains. I decided I wanted the butcher’s block look with a stained wooden top and white painted legs.

Materials Needed:

Here is the trolley after a bit of cleaning.

Ikea Bekvam Kitchen Trolley Before Painting
After cleaning, ready to start.

Step 1: Sanding

sandpaper for kitchen trolley paint project

Before I started sanding I cleaned the kitchen trolley thoroughly with a cloth and soap and then dried it off throughly.

I used a small hand sander because I already had one, but for a small project you can easily just go at it with the sandpaper alone. 100 grit should work fine for most projects, I used some heavy 60 grit for some of the really bad stains and thick dirt areas, this will likely scratch up your wood so be careful! In my case I had no choice because of the state it was in, but if your trolley has lived indoors (as intended!), you shouldn’t have this problem.

kitchen trolley after sanding

After a good sanding, the top of my table still had some stains showing through, I decided to embrace them as part of the woods character, however if you wanted a perfectly clean look a power sander would definitely work those out.

Step 2: Painting & Staining

kitchen trolley with white painted legs

Time to start staining and painting! Make sure you give the paint can and the stain a good stir before you start. The amount of coats of stain you use will depend on how dark or coloured you want, I wanted more red undertones so I put on 3-4 coats, rubbing it in to the grain with a cloth.

I alternated putting a coat of stain on the butcher’s block style top with painting parts of the legs and trays white.

The bottom of the trolley only needed 2 coats of paint. Make sure you put a drop cloth or covering to protect your floor! I also recommend doing this work outdoors due to the fumes, especially when you use the polyurethane spray later.

Both the stain and the paint dries quickly, so I didn’t have to wait long between coats. Alternating between painting and staining also helped make this a quick upcycle.

Step 3: Polyurethane Coat

The polyurethane spray unfortunately needs two hours of drying between coats. I did 3 coats as per the bottles instructions. I purchased polyurethane spray which made applying super quick, but you can get it as a brush on varnish, it doesn’t have to be a spray.

Make sure not to get any polyeurathane on the painted areas as it will turn them yellow (I learned that the hard way!) The polyurethane is essential if you are using this in the kitchen as it makes for an easily cleanable surface. When it gets wet the water actually beads on the surface.

kitchen trolley top stained
Water beading on the Polyurethane Coated Top

Below is the finished product. The stain and paint colour you choose could totally change the style of your kitchen trolley. I like the red tones in this stain, which fits in with my country kitchen style however a dark walnut would also look very striking and sleek.

kitchen trolley after painting and staining

I decided to stain my kids snack table (also IKEA) to match the island…. oh yes, IKEA may call it a kitchen trolley, but now that I have upcycled it, I’m calling it my Kitchen Island!

This Guide was written by Charlie Miller for Upcycle My Stuff.

Want to keep up cycling in the kitchen? Check out our DIY Kitchen Makeover Upcycle Ideas.

What would you like to Upcycle Today?

Thinking of Starting Your Own Upcycling Business?

Download our free Top Tips for Brand New Upcycling Businesses
What would you like to Upcycle Today?

Thinking of Starting Your Own Upcycling Business?

Download our free Top Tips for Brand New Upcycling Businesses