Skip to Content

How to Upcycle a Bicycle Chain – Chunky Bracelet

Make a DIY Bicycle Chain Bracelet for yourself or as a gift. Make it funky and pink or embellish it to suit your style.

These bracelets make great DIY gifts for Men.

Materials Needed – DIY Bicycle Chain Bracelet

bike chain
Photo: REI Co-op

Step 1: Measure & Separate Your Bicycle Chain Links

Ideally for this project you know who the bracelet will be for so that you can measure their wrist and get an idea of how loose or tight they like their bracelets.

Next measure your findings (these are the hoops and clasps you will use to fasten your bracelet) so you know how long they are and then subtract that measurement from the total wrist measurement you took earlier to give you the measurement of how long you want your section of bicycle chain to be.

When you have measured it out you need to use your pliers to pull apart and detach the rest of the chain at the appropriate point.  

This is the trickiest part of the project and how thick your chain is will play a big part in how difficult you find this.  

If you are having trouble try using a clamp or other means to keep the chain steady while you pull apart the links.

Step 2: Choose Finishes & Embellishments

The final step is to decide what finish you want your bicycle chain bracelet to be. Do you want to spray paint it pink as we’ve suggested or just clean and polish it up to its original chrome shininess?

We have spray paint colour suggestions in our Pink Me Up list of the top Upcycle Ideas to add a bit of pink to your life. But of course you could use whatever colour takes your fancy.

Other finish ideas:

  • Speckle some paint in a bright colour so you end up with a messy polka dot effect.
  • Use gold or copper leaf for a luxe look.
  • Thread thin strips of leather or ribbon through the links to add colour and interest.
  • Buff and clean your chain and keep it undecorated for a rugged masculine finish.

Step 3: Choose your findings (closure)

The key to this project is to use a jump ring on either end of your chain that gives you enough clearance over the bike chain to attach your chosen closure.

There are a number of types on the market from a lobster clasp key ring clip (as in the main image above of the pink chain bracelet) to magnetic clasps and barrel clasps.

Depending on how thick your actual bicycle chain is we would probably suggest going for a chunkier closure for this project – a large lobster clasp that is designed for a keyring would probably work best.

This is so that the whole bracelet sits a bit better on the arm. But you can play about with this one.  

If you already have a jewellery making kit with different closures or a pile of grandma’s broken jewellery that you can use the clasps and jump rings off of, then have fun experimenting and see what suits your chain and your own personal style.

Step 4: Attach your jewellery findings

Now all you have to do is open the end of the loops that will allow your clasp to fasten and thread them through the holes you revealed on either end of your chain when you separated it from the rest.

To do this use your jewellery pliers to open the jump ring, thread it through the hole in the end of the chain and also through the small loop at the end of which ever type of closure you have chosen and then use your pliers to close up the jump ring again.

Photo: Andria Beiber Designs

Step 5: Show off your funky Bicycle Chain Bracelet


That’s it. We’d love to see how you got on with this project. What kind of closure did you go for?

Drop us a comment or head over to our Facebook Page to join the chat.

Want to make some more upcycled jewellery?  Try our tutorial for making fabric wrapped bangles!

If you liked it, Pin it to your Upcycling or Repurposed Jewellery board!

how to make a bicycle chain bracelet
bicycle chain bracelet

DIY Bicycle Chain Bracelet

Active Time: 1 hour
Total Time: 1 hour
Difficulty: Medium
Estimated Cost: 10

Make a funky DIY bicycle chain bracelet and add your own design to it using spray paint and other embellishments.


  • Old Bicycle Chain
  • Jewellery Findings
  • Spray Paint or Other Embellishments


  • Standard Pliers
  • Jewellery Making Pliers


  1. Measure your Bicycle Chain and jewellery findings to ensure they will fit the intended wearer of your bracelet.
  2. Detach excess chain using your pliers.
  3. Decorate or embellish your bike chain using spray paint, ribbon, leather or even gold leaf.
  4. Use your jewellery pliers to attach jump rings and a clasp.

If you liked this post you should check out these ones too!

This site uses Akismet to reduce spam. Learn how your comment data is processed.

What is Upcycling & What can you Upcycle? - Upcycle My Stuff

Wednesday 26th of August 2020

[…] smaller unneeded bike or appliance parts into jewellery and […]

Pink Me Ups - Upcycle Ideas to Add a Pop of Pink to your Life. - Upcycle My Stuff

Tuesday 19th of November 2019

[…] We admit the oil drum bench seat requires some specialist tools to cut and smooth the metal, but we think the bicycle chain bracelet is a pretty simple one you can easily try yourself, even if you are a complete novice at upcycling. Here is the link to our How to Guide. […]

25 Last Minute Father's Day Gift Upcycle Ideas - Upcycle My Stuff

Tuesday 19th of November 2019

[…] you see our How to Guide for making a chunky bracelet from old bicycle chain? Our guide encouraged you to spray paint it pink when you were done but maybe if you are short on […]

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Skip to Instructions