– Pallet Wood off-cut – Old Knobs – Wood Varnish (or Stain if you prefer) – Hanging – Mouse Sander – Drill
Step 1: Cut your Pallet Wood to Size
I cut my pallet wood to the same size as my face mask organizer – 15” x 4”.
Step 2: Drill Holes
Before drilling the holes for them I set some knobs on top of my pallet wood to get a rough idea where I wanted them and measure the distance before drilling my holes.
Step 3: Sand
Sand your piece of pallet wood down using a mouse sander (the easiest way) or sand paper. Always going in the direction of the grain.
Step 4: Varnish the Wood
Okay so here is where I have to fess up that this is a short cut hack version of treating pallet wood for use. In short I used one coat of wood varnish and nothing else!