This post may contain affiliate links. Read the full disclosure here
I decided to update our plain IKEA Bekvam Kitchen Trolley after it spent a sad year living outdoors on a patio. It was pretty worse for wear and covered with lots of dirt and stains. I decided I wanted the butcher’s block look with a stained wooden top and white painted legs.
- Damp cloths
- Any multi-purpose cleaner (I used Ecogurus Cleaning Paste)
- Drop cloth or other floor covering
- Cloth to use with the stain, I used an old sock that had a hole in it. You likely wonâ€™t be able to use the cloth for anything else after so use something that you donâ€™t mind getting rid off.
- Sandpaper – 100 grit and 60 grit is what I used because my trolley was pretty worse for wear.
- Optional: Hand Sander
- Paint brushes
- Wood stain in the colour of your choice, I used red mahogany.
- Primer and Paint in the colour of your choice. I used a paint and primer in one and I went for matte white.
- Polyurethane spray
Here is the trolley after a bit of cleaning.
Step 1: Sanding
Before I started sanding I cleaned the kitchen trolley thoroughly with a cloth and soap and then dried it off throughly.
I used a small hand sander because I already had one, but for a small project you can easily just go at it with the sandpaper alone. 100 grit should work fine for most projects, I used some heavy 60 grit for some of the really bad stains and thick dirt areas, this will likely scratch up your wood so be careful! In my case I had no choice because of the state it was in, but if your trolley has lived indoors (as intended!), you shouldn’t have this problem.
After a good sanding, the top of my table still had some stains showing through, I decided to embrace them as part of the woods character, however if you wanted a perfectly clean look a power sander would definitely work those out.
Step 2: Painting & Staining
Time to start staining and painting! Make sure you give the paint can and the stain a good stir before you start. The amount of coats of stain you use will depend on how dark or coloured you want, I wanted more red undertones so I put on 3-4 coats, rubbing it in to the grain with a cloth.
I alternated putting a coat of stain on the butcher’s block style top with painting parts of the legs and trays white.
The bottom of the trolley only needed 2 coats of paint. Make sure you put a drop cloth or covering to protect your floor! I also recommend doing this work outdoors due to the fumes, especially when you use the polyurethane spray later.
Both the stain and the paint dries quickly, so I didnâ€™t have to wait long between coats. Alternating between painting and staining also helped make this a quick upcycle.
Step 3: Polyurethane Coat
The polyurethane spray unfortunately needs two hours of drying between coats. I did 3 coats as per the bottles instructions. I purchased polyurethane spray which made applying super quick, but you can get it as a brush on varnish, it doesn’t have to be a spray.
Make sure not to get any polyeurathane on the painted areas as it will turn them yellow (I learned that the hard way!) The polyurethane is essential if you are using this in the kitchen as it makes for an easily cleanable surface. When it gets wet the water actually beads on the surface.
Below is the finished product. The stain and paint colour you choose could totally change the style of your kitchen trolley. I like the red tones in this stain, which fits in with my country kitchen style however a dark walnut would also look very striking and sleek.
I decided to stain my kids snack table (also IKEA) to match the island…. oh yes, IKEA may call it a kitchen trolley, but now that I have upcycled it, I’m calling it my Kitchen Island!
This Guide was written by Charlie Miller for Upcycle My Stuff.
Want to keep up cycling in the kitchen? Check out our DIY Kitchen Makeover Upcycle Ideas.